Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Reseda, CA
Gate access control in Reseda usually comes down to two things: aging keypads and telephone entry systems on 1980s apartment buildings, and homeowners who want to stop giving out gate codes. The interior Valley heat cooks circuit boards inside keypad housings, and when the temp climbs past 105°F, we see a spike in dead keypads and shorted card readers. If your gate won’t open from the keypad or your intercom stopped ringing inside, call (747) 294-2900 and we’ll send a technician with a written price before any work starts.
Why Reseda Homes Are Different
Reseda’s housing stock tells you exactly what kind of gate problems to expect. The 1950s and 1960s ranch homes mostly have tubular-steel or wrought-iron driveway gates installed during the 1980s security-gate boom. Those gates are now 35 to 45 years old, and their hinge welds are fatiguing. The apartment complexes from the 1970s and 1980s have pedestrian gates that cycle hundreds of times a day, which eats latches and hinges at a rate you won’t see on a single-family driveway gate.
The deeper issue in Reseda is the post-quake repair rush. The 1994 Northridge earthquake, with its epicenter right at the Reseda-Northridge line, forced thousands of gate and fence replacements between 1994 and 1996. Many of those footing pours were rushed. Unbraced, shallow concrete. Now, 28 to 30 years later, those posts are heaving and tilting. A gate tech who just re-hangs a new gate on a compromised post guarantees a callback within a year. Any estimate in Reseda should include a footing check if the post dates from that window.
Then there’s the heat. Summer highs of 105°F to 112°F make steel frames expand and bind in their tracks. Opener motors overheat. Nylon rollers crack. Santa Ana winds slam unlatched gates against their stops and bend hinges. Reseda gates fail differently than coastal gates, and the repair approach has to account for that.
Our Main Reseda Services
Most Reseda calls start with one of these three problems: a gate that won’t open, a gate that needs to be replaced, or a motor that gave up in the heat. Each service gets its own dedicated Reseda page with full pricing.
Gate Repair in Reseda
Repair work in Reseda means realigning a binding steel frame on a 105°F day, replacing a bent hinge from a Santa Ana wind event, or fixing a latch that’s been cycled ten thousand times on an apartment pedestrian gate. We diagnose the mechanical problem first, then write the price. Before any work starts, you get a flat number in writing. That’s the whole point. Full details are on the Gate Repair in Reseda page.
Gate Installation in Reseda
New gate installations in Reseda require checking the existing posts before anything gets measured. If the footings were poured between 1994 and 1996, we verify depth and bracing before hanging a new gate. The 1980s gates on many ranch homes aren’t worth rebuilding. A new tubular-steel or wrought-iron gate, set on solid posts, gives you 25 years instead of two. See the full breakdown on the Gate Installation in Reseda page.
Gate Motor & Opener in Reseda
Opener motors in Reseda work against the hottest summers in the Valley. Overheated motors, stripped gears, and failed limit switches are the most common calls we get between June and October. We service nine automation brands, so you don’t need to replace a perfectly good operator just because its motor burned out. Costs and common failures are on the Gate Motor & Opener in Reseda page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Reseda
Gate access control in Reseda means keypads, card readers, phone entry systems, and video intercoms on gates that serve everything from a single-family driveway to a 30-unit apartment building. The 1970s and 1980s apartment stock in Reseda runs telephone entry and keypad systems that are now decades old, and the wiring inside those pedestals is cooking in the same heat that kills the circuit boards. A dead keypad on a rental property isn’t just annoying, it’s a tenant complaint and a security gap. We diagnose the exact failure, write the flat price, and leave you with a photo log of what we found and what we replaced. That’s what you get with our Gate Access Control work, and it’s documented on every visit.
Keypad Entry
Signs you need it
The keypad accepts the code but the gate doesn’t move, or the buttons feel dead and unresponsive.
What it costs in Reseda
Keypad replacement in Reseda typically runs $250 to $550 depending on whether we’re replacing just the keypad or the keypad plus the control board inside the operator.
How we do it
We test the keypad output at the operator, replace the failed component, reprogram the codes, and photograph the new settings before handing you the written record.
Phone Entry
Signs you need it
The call box buzzes but never rings the tenant’s phone, or it rings but won’t release the gate.
What it costs in Reseda
Phone entry repair in Reseda usually runs $300 to $600, with full system replacement between $900 and $2,200 depending on how many units are in the system.
How we do it
We trace the phone line from the pedestal to the controller, identify the failed relay or board, and replace only what’s broken before testing every unit’s call path.
What Gate Access Control Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Keypad replacement | $250 - $550 |
| Phone entry repair | $300 - $600 |
| Full telephone entry system | $900 - $2,200 |
Can you install a card reader on my Reseda gate?
Yes. Card readers work well for apartment buildings and HOAs in Reseda where tenants need stable entry without shared codes. We install proximity readers that tie directly into your existing operator. Most installations run $400 to $900 per reader, including wiring and programming. Call (747) 294-2900 for a written quote before any work starts.
Why do keypads fail so often in Reseda?
The interior Valley heat builds up inside the keypad housing, especially on south-facing gates. Circuit boards expand and contract, solder joints crack, and the membrane buttons degrade. A shaded keypad or a ventilated housing extends the life significantly. Call (747) 294-2900 and we’ll tell you what’s failing before we touch anything.
Gate Parts & Welding in Reseda
Gate parts and welding in Reseda handles the structural side of gate failure: hinges, posts, rails, rollers, and custom steel work. The post-quake footings from 1994 to 1996 are the big variable here. A post that’s heaving or tilting has to be addressed before or during any hinge or rail repair, because welding a new hinge onto a moving post just guarantees another failure. We weld, we replace, and we photograph every step. All Gate Parts & Welding work comes with a written price and a documented record.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground on the latch side, or makes a grinding sound when it swings.
What it costs in Reseda
Hinge replacement in Reseda typically runs $150 to $400 per pair, more if the post is also compromised and needs bracing or replacement.
How we do it
We weld or bolt new hinges in place, align the gate square, and photograph the final weld before we leave.
Post Replacement
Signs you need it
The post leans visibly, the concrete at the base is cracked or pulled away, or the gate won’t line up with the latch no matter how it’s adjusted.
What it costs in Reseda
Post replacement in Reseda is where the biggest price swings are, because on a structural walk gate it usually runs $300 to $600 for hinge post and latch post, while on a driveway gate the job runs $400 to $1,000 because we’re dealing with a heavier post, a deeper footing, and a heavier gate.
How we do it
We cut out the old post, dig the footing to proper depth, set the new post in concrete, and let it cure before re-hanging the gate.
What Gate Parts & Welding Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Hinge replacement | $150 - $400 per pair |
| Post replacement (walk gate) | $300 - $600 |
| Post replacement (driveway gate) | $400 - $1,000 |
Can you weld a broken gate frame in Reseda?
Yes. If the steel is structurally sound and the break is clean, welding is cheaper than replacing the gate. We grind, weld, and reinforce the joint. Most frame repairs run $250 to $600 depending on the size of the break. Call (747) 294-2900 for an exact written price.
Why does my gate post keep leaning?
In Reseda, if your post was set between 1994 and 1996, it probably has a shallow or unbraced footing from the post-earthquake repair rush. Re-hanging a gate on that post just repeats the problem. We check the footing before recommending any repair. Call (747) 294-2900 for a footing inspection before you spend money on the gate itself.
Brands We Service in Reseda
We service Linear, Viking, Ghost Controls, and DoorKing equipment in Reseda, along with the other major automation brands. We stock common control boards, keypads, and safety components locally, which means most repairs happen in one visit. See our brands page for the full installed and serviced list.
Pricing for Gate Repair in Reseda, CA
| Service | Typical range in Reseda |
|---|---|
| Keypad replacement | $250 - $550 |
| Phone entry repair | $300 - $600 |
| Full telephone entry system | $900 - $2,200 |
| Hinge replacement | $150 - $400 per pair |
| Post replacement (walk gate) | $300 - $600 |
| Post replacement (driveway gate) | $400 - $1,000 |
| Frame repair / custom welding | $250 - $600 |
Post-quake footing problems are the biggest cost multiplier in Reseda. When a 1994-to-1996 post has to be replaced, that adds a few hundred dollars to any gate job, but it’s the only way to keep the repair from failing within a year. Every price is written and handed to you before we pick up a tool, and the number we quote is the number you pay.
Neighborhoods We Serve in Reseda
We cover all of Reseda, from the blocks near Reseda Boulevard down to the neighborhoods along Tampa Avenue and Victory Boulevard. Typical response time for gate repair in Reseda is same-day or next-day depending on the time of the call and the parts needed.
- Reseda Ranch
- North Reseda
- South of Sherman Way
- Lake Balboa border area
- Reseda West near Wilbur Avenue
Service Area - Cities Near Reseda
Our Reseda crews also cover the neighboring Valley communities. If you’re just over the line, we serve Winnetka, CA, Tarzana, CA, Northridge, CA, and Canoga Park, CA with the same written-price policy and documented photo record.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Reseda
Most Reseda calls get same-day or next-day dispatch. A live person answers 24/7, so if your gate is stuck open at midnight, you’ll reach a human who can schedule a technician. No voicemail loop. Call (747) 294-2900 and tell us what’s happening.
Most gate repairs, hinge replacements, and motor swaps don’t require a permit. A full gate replacement with new footings can trigger a permit requirement depending on the scope and the city’s current enforcement. We’ll tell you during the estimate whether your project needs one. The written quote covers exactly what we’ll do.
Every visit includes a photographed record of what we found, what we adjusted, and what we installed. You get that photo log plus a written record of part numbers and settings. No future technician has to guess what was done. That’s the standard on every Reseda job, no exceptions.
Call (747) 294-2900 for a free estimate on gate access control or gate parts and welding in Reseda. A live person answers, and your written price comes before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reseda Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.