Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across San Fernando
A new driveway gate in San Fernando typically runs between $2,800 and $9,500 installed, depending on whether you’re replacing a swing gate with a similar unit or engineering a custom slide gate for a narrow lot. Most installations take one to two days on site, and we schedule San Fernando jobs every week. The price you’re quoted is the price you pay. It’s written down before any work starts. Call (747) 294-2900 and we’ll walk the property, measure the opening, and hand you a written scope with a fixed number on it.
San Fernando gates aren’t like gates anywhere else in the Valley. The city’s independent permitting, the 1971 earthquake’s long shadow, and lot geometry from the 1940s and 50s all shape what actually works here. We’ve learned this block by block, job by job. A gate that holds up on a wide Granada Hills lot can fail in a San Fernando side yard if the footing wasn’t set for what’s underneath it. That’s the difference between a gate installed and a gate engineered.
Our Gate Installation team schedules free on-site estimates across San Fernando with written pricing you keep before you decide anything.
Why Vance Gate Repair Santa Clarita Is San Fernando’s Preferred Gate Installation Company
We’ve installed and repaired over 22,000 gates since 2014, and every single one came with a written price before the first tool came off the truck. That’s not a marketing line. It’s Clause 1 of our Haven Standard. You get a document with the scope, the materials, the labor, and the total. No verbal estimate that drifts upward by the time the invoice arrives.
San Fernando homeowners call us because the gate problems here are structural, not cosmetic. A gate that worked fine for 40 years suddenly starts grinding or reversing. Nine times out of ten, the operator isn’t the problem. The post has shifted. The hinge geometry is off. The track is binding in the heat. We find that before we quote you a new motor you don’t need.
Every job includes a documented photo record. What we found, what we set, what we installed. You keep it, and it stays in your job file. The next technician who works on your gate, whether that’s us or someone else, won’t have to guess. That habit came from commercial access-control work, where a gate that locks out a tenant has to be documented or you can’t defend the repair. Adrian Vance built this company on that discipline starting in 2014, and it applies to every residential driveway gate we touch in San Fernando.
When you call (747) 294-2900, a live person answers. Day or night. You’ll get a name, and our technician arrives with their name and photo provided before they show up. Background-checked, uniformed, and carrying the tools for nine major automation brands. No voicemail loop. No callback queue.
Our Gate Installation Services in San Fernando
We install residential gates of every type across San Fernando, from a simple pedestrian gate off Gloria Avenue to a custom double swing gate on a corner lot near San Fernando High School. Here’s what we see most often, and how we handle it here specifically.
Driveway Gate Installation
Most San Fernando driveways have either a swing gate or a slide gate, and the choice isn’t just preference. It’s geometry. Your lot width often decides it before you do. We measure the actual clearances, check how the driveway slopes toward the street, and tell you what fits. If a slide gate track would eat into a neighbor’s property line or kill your side-yard access, we’ll say so before you’ve spent a dollar. A galvalume steel driveway gate with a basic operator usually runs $3,200 to $6,800 in San Fernando, depending on width and whether we’re setting new footings.
Pedestrian Gate Installation
Pedestrian gates in San Fernando are usually the stubborn ones. A 1950s-era wrought-iron pedestrian gate with a corroded latch and a hinge that’s been grinding for years. We replace or fabricate the gate to match the house, install new hinges with proper standoffs, and add a maglock or electric strike if you want controlled entry. Most pedestrian gate replacements run $900 to $2,400 installed, including hardware and a fresh coat of primer and paint matched to your existing iron.
Sliding Gate Installation
Sliding gates are the right answer for a lot of San Fernando driveways, especially where a swing gate would arc across a sidewalk or into a parked car. But many of these lots were laid out before slide gates were common, which means standard track systems don’t always fit. We’ve built custom solutions with galvalume tracks, cantilever systems, and rack and pinion drives that work in side yards under six feet wide. A cantilever slide gate installed with an operator typically runs $5,500 to $9,500 in San Fernando. On a 1950s street near the San Fernando Mall, we replaced a rusted wrought-iron swing gate with a custom slide gate using a galvalume rack and pinion drive because the narrow side yard left no room for a conventional track. The original hinge posts had an outward lean from post-1971 earthquake footing settlement, so we poured new post footings with deeper embedment and integrated a LiftMaster operator with safety photocells to handle the Valley’s heat-expansion cycles. The result is a gate that opens silently even when summer temperatures climb past 100°F.
Swing Gate Installation
Swing gates are the classic San Fernando look, especially on the 1940s and 50s homes that dominate the city’s blocks off Maclay Avenue and Brand Boulevard. The problem here isn’t the gate itself. It’s what it hangs on. Many of the brick and masonry pilasters in this city have decades of seismic settlement from 1971, and a new gate bolted to a leaning post will sag within a year. We check the post before we quote the gate. If the post needs resetting or replacing, that’s part of the written scope, not a surprise add-on. A single swing gate with an operator typically runs $3,000 to $6,500 in San Fernando, including new hinges, stops, and safety edges.
Double Gate and Security Gate Installation
For wider driveways, we build double swing gates or double slide gates with matched panels, synchronized operators, and a center latch that actually holds. Security gates in San Fernando often mean a heavier steel frame, a closed-box design or tall pickets, and an access system that’s actually documented. Intercom, keypad, vehicle detection loop, camera, maglock. We wire it, label the connections, and photograph the panel before we close it. That photo log is yours.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in San Fernando
We work on what’s already on your property. If you have a Viking operator on a slide gate, we service it and we’ll install Viking again if that’s what fits your setup. Same with DoorKing, Ghost Controls, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We don’t steer you toward a replacement brand because we get a better margin on it. The motor that matches your gate and your wiring is the right motor. We stock common boards, remotes, photo eyes, and limit switches for the brands we see most across the San Fernando Valley, which means less waiting on a part drop for your neighborhood.
Common Gate Installation Problems We See in San Fernando Homes
- Leaning masonry pilasters from 1971 earthquake settlement. A post that’s two or three degrees off-vertical will throw hinge geometry out and make an automatic operator reverse or throw fault codes. The operator usually isn’t the problem. The footing is. We check the post before we quote a new motor.
- Heat expansion binding slide gates in summer. Valley heat regularly pushes past 100°F in San Fernando, and steel frames grow. A gate that clears its track in January can bind in August. We set track clearances for the thermal range, not for the day of installation.
- Narrow lot geometry that kills standard slide gate tracks. Plenty of San Fernando side yards are under seven feet wide. A conventional slide gate track needs real estate. We fabricate cantilever or rack-and-pinion solutions when a track would cross into a neighbor’s property or block your own access.
- Santa Ana wind stress on unsecured swing gates. When wind accelerates through the Valley corridors, an unlatched swing gate can slam hard enough to crack a pilaster or bend a hinge. We install wind-rated stops, drop rods, and magnetic catches where the gate needs to hold open or closed through gust season.
Pricing for Gate Installation in San Fernando, CA
Here are the numbers we quote most often in San Fernando. These are installed prices including materials, labor, and a written scope before any work starts.
- Pedestrian gate replacement: $900 to $2,400
- Single swing driveway gate with operator: $3,000 to $6,500
- Double swing gate set with synchronized operators: $6,000 to $12,000
- Cantilever slide gate with operator: $5,500 to $9,500
- Custom ornamental steel gate, matched to existing iron: Add $1,000 to $2,500 depending on fabrication complexity
- New post footings or pilaster reset: $800 to $2,200 per post, depending on whether excavation hits old concrete or seismic-fractured masonry
These aren’t “starting at” prices. They’re the actual ranges for the work we do in San Fernando, and every one of them gets written down and handed to you before you agree to anything. Free estimate. Free second opinion on any written estimate from another gate company. Bring us the paperwork and we’ll review it at no cost. Call (747) 294-2900 and we’ll set a time to measure.
We Also Serve Cities Near San Fernando
We install gates throughout the northeast San Fernando Valley, including Sylmar, Mission Hills, Granada Hills, and Panorama City. If you’re a few blocks over the city line, we’re still your gate company. Dispatch and scheduling are coordinated from our Los Angeles office, and our crews serve San Fernando directly every week. Call (747) 294-2900 and we’ll tell you the next available measure time for your street.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in San Fernando
Yes. San Fernando is an independent municipality, and it runs its own building department. Your permits and inspections go through the City of San Fernando, not LA City’s system. Most new gate installations with electrical operators and new footings require a permit. We handle the permit paperwork and the inspection scheduling as part of the written scope. Many outside Valley contractors don’t realize San Fernando isn’t just another LA neighborhood, and their customers find out at inspection time. We already know the drill. Call (747) 294-2900 and we’ll confirm what your specific project needs before we schedule anything.
In San Fernando, the operator usually isn’t the problem when a swing gate keeps reversing or throwing fault codes. The post has moved. Many masonry pilasters in the city’s older blocks carry seismic settlement from the 1971 Sylmar earthquake that was never corrected. A post that’s two to three degrees off-vertical at the base looks plumb at eye level, but it throws hinge geometry out gradually. The new operator tries to compensate, hits resistance, reverses, and throws a code. The fix is resetting or replacing the post and re-hanging the gate, not buying a third motor. We’ll diagnose it and show you photographic evidence of what we found before we recommend anything. Call (747) 294-2900 for a written diagnosis.
Usually yes. A cantilever slide gate doesn’t need a ground track at all. It rides on rollers mounted to posts, which means the gate panel itself carries its own weight without running along the ground. This works on narrow San Fernando lots where a conventional track would cross a property line or choke a side yard. We also install rack and pinion systems where the drive rail mounts to the gate face rather than needing separate ground hardware. The engineered solution costs more than a standard track, but it works where a standard track physically cannot. Call (747) 294-2900 and we’ll measure what you’re working with and quote the right system for your yard.
Santa Ana winds funnel through the Valley and hit swing gates broadside. A gate left unlatched in a wind event can swing hard enough to crack a masonry pilaster, especially one already weakened by old earthquake settlement. The damage isn’t gradual. It happens in one gust. We install wind-rated stops, drop rods for holding the gate open, and magnetic catches that latch the gate closed without a manual bolt. For automatic gates, we set the operator’s closing force and obstruction sensitivity so the gate doesn’t fight the wind and burn out the motor. If your gate already has wind damage, we’ll quote the repair and the prevention together. Call (747) 294-2900 for an assessment.
Yes. We fabricate custom ornamental steel gates to match period details, whether that’s simple mid-century railings off a 1950s rancher on a street near San Fernando High School or a more decorated Spanish Colonial style closer to the San Fernando Mall. We match the picket profile, the scrollwork, the finish, and the hinge style. When you’re matching a pedestrian gate to an existing driveway gate, we photograph both and build to match. It’s fabrication, not a catalog order, so expect a week or two for the build. The result looks like it belonged to the house since 1955. Call (747) 294-2900 and we’ll bring samples and a tape measure.
Get a Written Price Before You Decide
If you’re in San Fernando and you need a gate installed, replaced, or re-engineered, call (747) 294-2900. We’ll schedule a free on-site measure, put the scope and price in writing, and hand it to you before anything gets ordered. You keep the paperwork either way. No pressure to sign that day, no verbal estimates, no invoice surprises. That’s how we’ve done business since 2014, and it’s how we’ll do yours.
Written by Adrian Vance, Owner at Vance Gate Repair Santa Clarita, serving San Fernando with written pricing and documented gate work since 2014.
Gate Installation in Nearby Areas