Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in San Fernando, CA
Gate access control in San Fernando usually means one of two things: a keypad or intercom system on a wrought-iron driveway gate built in the 1950s, or a phone-entry retrofit on a pedestrian gate that hasn’t latched right since the 1971 Sylmar earthquake left its pilaster leaning a degree or two. Add summer heat that warps steel frames past 100°F, and you get keypads that read fine at 8 a.m. and fault out by 2 p.m. We work on the gate, the motor, and the access system as one assembly, because in San Fernando they usually fail as one assembly. Call (747) 294-2900 and you’ll get a person, not a queue.
Why San Fernando Homes Are Different
San Fernando is an independent city entirely surrounded by Los Angeles, so gate permits and inspections go through San Fernando’s own building department, not LA City’s. Contractors who mostly work the Valley get this wrong regularly. The housing stock is mostly 1940s to 1960s post-WWII single-family homes on tight lots, and the gates are wrought iron, now 50 to 70 years old, with corrosion at hinge welds and latch hardware that has been baking in Valley heat for half a century. Santa Ana winds slam unsecured swing gates hard enough to crack masonry pilasters already carrying seismic settlement from 1971. A pilaster that looks plumb at eye level is often 2 to 3 degrees off at the base, which is exactly why an automatic gate keeps reversing and throwing fault codes: the geometry is shifting, not the operator.
Our Main San Fernando Services
Two services dominate the calls we take in San Fernando: gate access control and gate parts and welding. These three pages cover the other high-volume jobs in this city.
Gate Repair in San Fernando
Most repair calls in San Fernando start as a gate that drags, won’t latch, or reverses mid-cycle. On these older lots, the cause is usually a hinge that has corroded at the weld or a post that settled out of square after decades of seismic movement and Valley heat. We diagnose the full assembly, not just the symptom, and you get a written price before any tool comes out. See Gate Repair in San Fernando for what we find most often on this housing stock and what it costs here.
Gate Installation in San Fernando
San Fernando’s side yards are narrow enough that converting a swing gate to a slide gate often means a custom track solution to avoid encroaching on a neighbor’s property line. New installations here also mean working through San Fernando’s own permit path, which differs from LA City’s. We measure, quote in writing, and document the install. Gate Installation in San Fernando covers the full scope.
Gate Motor & Opener in San Fernando
Motors on San Fernando gates work harder than they should: summer heat expands the steel frame and binds the operator, and a gate on a slightly settled post loads the motor unevenly every cycle. We service nine brands including LiftMaster, DoorKing, and Elite, so we can usually repair the motor already on the property rather than replacing it. Gate Motor & Opener in San Fernando has the details.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in San Fernando
Gate access control in San Fernando means keypads, card readers, phone-entry systems, and video intercoms on gates that are often 50 to 70 years old, mounted to posts that have settled since the 1971 Sylmar earthquake, and wired through conduits that have cooked in Valley heat for decades. Here’s the good news: none of this is mysterious. Gate Access Control is a core service, and we document every wire, settings, and photo before we leave.
Keypad Entry
Signs you need it
The keypad works sporadically, fails in afternoon heat, or a tenant’s code won’t clear.
What it costs in San Fernando
Keypad replacement or new install jobs start around $275-$400, with more for long wire runs across a San Fernando driveway.
How we do it
We bench-test the keypad, run a new low-voltage leg if conduit has degraded, mount and seal the new unit, program all codes, and photograph the wiring before closing the box.
Video Intercom
Signs you need it
Callers can’t hear you, the camera’s cloudy, or you can’t open the gate from the house.
What it costs in San Fernando
Most video intercom retrofits on San Fernando homes run $350-$900 depending on whether we reuse existing wire or pull new cable through an old conduit.
How we do it
We locate the existing two-wire or four-wire run, replace the door station and monitor, set the relay to the gate operator, and leave a wiring diagram with the part numbers.
What Gate Access Control Costs in San Fernando
| Item | Typical range in San Fernando |
|---|---|
| Keypad entry replacement | $275 - $400 |
| Video intercom retrofit | $350 - $900 |
| Phone entry system install | $600 - $1,200 |
Can you add a keypad to my existing San Fernando gate without replacing the motor?
Yes, in most cases. We wire the keypad directly to the operator’s control board or a receiver, and the existing motor stays. The flat price is written before work starts.
Do you service access control on gates in San Fernando’s older neighborhoods?
Yes. We’re familiar with the post-settlement conditions on San Fernando’s older blocks and check gate geometry first, because that’s often what makes access hardware misbehave in this city. Call (747) 294-2900 for a written quote.
Gate Parts & Welding in San Fernando
Fifty- and sixty-year-old wrought iron gates in San Fernando fail at the welds first: hinge barrels crack, latch brackets corrode through, and post anchors fatigue from decades of earthquake settlement and Santa Ana wind loading. Whether we replace the part or weld the break, the fix has to survive the same heat, wind, and shifting ground that killed the original. Gate Parts & Welding covers the full scope of what we fabricate and repair.
Hinge Replacement
Signs you need it
The gate sags, scrapes the driveway, or the hinge pin is worn thin and the gate leans when open.
What it costs in San Fernando
Hinge replacement on San Fernando gates typically costs $250-$500 depending on gate weight and whether the post needs reinforcing.
How we do it
We support the gate, cut out the old hinge, weld in a new barrel and pin assembly, then adjust so the gate swings true on its settled post.
Custom Welding
Signs you need it
A picket has snapped at the weld, a top rail is cracked, or you need to modify a gate to clear a shifted driveway.
What it costs in San Fernando
Mobile welding repairs run $250-$800 per project in San Fernando, with price set by the weld time and materials after we see the gate.
How we do it
We prep the steel, MIG or TIG weld the repair, grind and dress the joint, then prime and paint to match the existing finish.
What Gate Parts & Welding Costs in San Fernando
| Item | Typical range in San Fernando |
|---|---|
| Hinge replacement | $250 - $500 |
| Post replacement | $500 - $1,100 |
| Custom welding repair | $250 - $800 |
Can you weld my gate without removing it from the post?
Usually yes. We weld on-site, supporting the gate, and the repair is documented with photos of the weld before and after finishing. Price is fixed before we start.
My gate post is cracked. Does that need a new post or can you weld it?
A cracked steel post can often be welded and sleeved in place. A cracked masonry pilaster usually needs reconstruction, because welding won’t help stone. Call (747) 294-2900 to have a technician look at it.
Brands We Service in San Fernando
We service LiftMaster, DoorKing, Elite, Mighty Mule, and five other major gate-automation brands, with common boards and receivers stocked in our LA parts inventory. If your San Fernando gate motor still works, we repair the brand already on it. Learn more about our brands.
Pricing for Gate Repair in San Fernando, CA
| Service | Typical range in San Fernando |
|---|---|
| Service call / diagnostic visit | $79 - $125 |
| Hinge replacement | $250 - $500 |
| Post replacement | $500 - $1,100 |
| Custom welding repair | $250 - $800 |
| Keypad entry replacement | $275 - $400 |
| Video intercom retrofit | $350 - $900 |
| Phone entry system install | $600 - $1,200 |
| Pedestrian gate installation | $650 - $1,400 |
| Driveway gate installation | $2,000 - $6,000+ |
| Slide gate motor replacement | $1,100 - $2,500 |
| Swing gate motor replacement | $900 - $2,200 |
In San Fernando, two things push a price upward: a gate that is on a post that has settled since 1971 and needs realignment before any new part will fit, and older conduit that has to be replaced before new low-voltage wire can run. The price we hand you before work starts is the price on the invoice; if we find something worse inside the gate, you approve any change in writing first.
Neighborhoods We Serve in San Fernando
Our technicians cover all of San Fernando and the immediately surrounding Valley. Most jobs in this area get a same-day or next-day dispatch, with a window you can plan around.
- Mission Corridor
- San Fernando Gardens area
- Truman Street district
- North Maclay Park blocks
- Garden District
Service Area - Cities Near San Fernando
Vance Gate Repair also handles gate work in the adjoining communities around San Fernando, including Sylmar, CA, Mission Hills, CA, Granada Hills, CA, and Panorama City, CA. If your gate is in one of these cities, we can send the same documented, written-price service.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Fernando
Most repairs, part swaps, and motor replacements do not need a permit. A new gate installation or moving a gate post does go through San Fernando’s own building department, not LA City’s. We can tell you which applies and handle the paperwork if needed.
In most cases, yes. We schedule San Fernando calls same-day or next-day, and we confirm the technician’s name before arrival. Call (747) 294-2900 any hour; a live person answers, not a voicemail loop.
Yes. That is the standard condition for this city’s 1940s to 1960s homes. We check the pilaster and footing geometry before we troubleshoot the motor, because the post is often the root cause. You get a written diagnosis and a fixed price before work begins.
For gate repair in San Fernando, call (747) 294-2900. We’ll give you a written price before any work starts, document every adjustment with photos, and stand behind the repair for 365 days. A live person answers at any hour.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Fernando Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.