Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Mission Hills, CA
Gate access control problems in Mission Hills usually come down to two things: keypads and card readers failing after years of triple-digit Valley heat, or wiring that was disturbed by post shift from the 1994 Northridge earthquake and never properly re-run. Wrought-iron security gates are standard on nearly every 1950s-1970s ranch home here, and when the electronics fail, the whole point of the gate disappears. Call (747) 294-2900 and a live person answers, day or night.
Why Mission Hills Homes Are Different
Mission Hills sits within the heaviest damage zone of the 1994 Northridge earthquake, whose epicenter was only a few miles away. Cracked driveways, shifted concrete slabs, and heaved gate-post footings from that event remain a persistent root cause of gate misalignment on properties that were never fully remediated. A local technician learns quickly to probe post footings before touching hinges or tracks: a gate post that looks plumb can be sitting on a footing cracked through in 1994, meaning any adjustment is temporary until the concrete is broken out and repoured. The neighborhood is dominated by 1950s-1970s single-story ranch tract homes on standard lots where concrete driveways with ornamental iron swing or sliding security gates are essentially universal. Triple-digit summer days make metal gate frames expand and bind in their tracks, while the Valley’s hard water accelerates rust on unpainted iron hardware. Santa Ana wind events put severe lateral loads on large swing gates and can derail sliding gates that are even slightly out of alignment.
Our Main Mission Hills Services
Most Mission Hills calls fall into one of these three categories, each with its own dedicated service page.
Gate Repair in Mission Hills
Iron driveway gates get out of square when hinges wear, posts shift, or tracks bind. In Mission Hills, post-shift from 1994 damage is the leading cause of a gate that drags or won’t latch. Our Gate Repair in Mission Hills page covers hinge replacement, post realignment, track repair, and full service details specific to this part of the Valley.
Gate Installation in Mission Hills
When a gate is beyond repair or a homeowner wants a different style, installation work starts with the post footings. On Mission Hills properties, existing footings often need to be broken out and repoured before a new gate can be set plumb. See Gate Installation in Mission Hills for what the process involves and what drives cost.
Gate Motor & Opener in Mission Hills
Motors and openers on Mission Hills gates work harder than they should when the gate itself is binding, and heat shortens capacitor and board life. Our Gate Motor & Opener in Mission Hills page covers diagnosis, replacement, and the nine automation brands we service on existing properties.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Mission Hills
Gate access control in Mission Hills means the keypads, remotes, phone entry units, card readers, and video intercoms that let you open the gate without leaving the car. Most systems on local 1950s-1970s ranch properties are wired through conduit that runs under concrete driveways, and when a keypad goes dead after years of heat exposure, the fix often requires pulling new wire through a path that was disturbed during post-earthquake repairs. We service and install every major brand on existing properties and document every wiring change before we leave. The full scope of this work lives on our Gate Access Control hub page.
Keypad Entry
Signs you need it
A keypad that reads every other button press, works only at night, or fills with moisture after rain is failing.
What it costs in Mission Hills
Keypad replacement or new installation in Mission Hills typically runs $180-$480 depending on the unit and wiring.
How we do it
We test the existing wiring, install the new keypad, program all codes, and photograph the finished connections.
Video Intercom
Signs you need it
When audio works but video is dead, the screen freezes, or night vision has gone black, the intercom needs attention.
What it costs in Mission Hills
Video intercom replacement in Mission Hills generally runs $350-$850 installed, including wiring verification.
How we do it
We check the camera, monitor, and power supply, then replace only what failed and hand you the photo record.
What Gate Access Control Costs in Mission Hills
| Item | Typical range in Mission Hills |
|---|---|
| Keypad replacement or new install | $180-$480 |
| Remote control setup or receiver replacement | $120-$350 |
| Video intercom replacement | $350-$850 |
Can you upgrade my older gate system to phone entry?
Yes. Phone entry can be added to most existing gate operators wired for a call or intercom function. We assess the operator board first, then install the phone module and program the directory on site. Call (747) 294-2900 for a written quote.
How long does a keypad or intercom repair take in Mission Hills?
Most keypad and intercom repairs are completed in one visit. If conduit under a Mission Hills driveway was crushed or disturbed, the wire pull can extend the job to half a day. The written price covers the full scope before work starts.
Gate Parts & Welding in Mission Hills
Gate parts and welding work in Mission Hills is mostly about ornamental iron: hinges that have sagged from post shift, rails that no longer align, and posts whose footings cracked in 1994 and were never repoured. Rust from hard water and frame expansion from triple-digit heat both eat at the same welds and fasteners. We do this work on site, with a written price handed over before the welder ever lights a torch. See Gate Parts & Welding for the full scope.
Hinge Replacement
Signs you need it
A gate that sags away from the latch side, scrapes the ground, or twists when opening has worn or broken hinges.
What it costs in Mission Hills
Hinge replacement on ornamental iron gates in Mission Hills runs $85-$250 per hinge installed, depending on size and weight.
How we do it
We support the gate, cut out the old hinge, weld in the new one, and photograph the penetration before paint.
Post Replacement
Signs you need it
A post that leans, shows cracks at the base, or moves when you push on it has lost its footing.
What it costs in Mission Hills
Post replacement with new concrete in Mission Hills runs $450-$1,200 per post, depending on depth and access.
How we do it
We break out the old footing, pour a new one, set the post plumb, and document the process before and after.
What Gate Parts & Welding Costs in Mission Hills
| Item | Typical range in Mission Hills |
|---|---|
| Hinge replacement | $85-$250 per hinge |
| Post replacement with new footing | $450-$1,200 per post |
| Custom welding repair (cracked frame, re-weld) | $150-$450 per repair |
Can you weld a cracked iron gate frame on site?
Yes. Most cracked frames can be welded in place without removing the gate. We grind back the material, weld the crack, and photograph the finished joint. Call (747) 294-2900 for an exact written price.
Why does my Mission Hills gate post keep leaning after realignment?
Usually the footing underneath cracked during the 1994 Northridge earthquake and was never replaced. Realigning the hinge only masks the problem. The lasting fix is breaking out the footing, repouring, and resetting the post.
Brands We Service in Mission Hills
We work on Linear, Viking, Ghost Controls, and DoorKing systems in Mission Hills without pushing you toward a replacement. Our trucks carry common boards, remotes, and receivers for these brands, which keeps most repairs down to a single visit. See our brands for the full list of nine automation lines we service.
Pricing for Gate Repair in Mission Hills, CA
| Service | Typical range in Mission Hills |
|---|---|
| Hinge replacement | $85-$250 per hinge |
| Post replacement with new footing | $450-$1,200 per post |
| Keypad replacement or new install | $180-$480 |
| Remote control setup or receiver replacement | $120-$350 |
| Video intercom replacement | $350-$850 |
| Custom welding repair | $150-$450 per repair |
| Rail repair or realignment | $120-$350 |
| Gate roller replacement | $90-$280 per set |
Prices rise in Mission Hills when a post footing needs to be repoured because of 1994 earthquake damage, or when a conduit run under a driveway has to be re-pulled. Every price is written and handed over before any work starts, under Clause 1 of the Haven Standard.
Neighborhoods We Serve in Mission Hills
We cover all of Mission Hills and the streets around Sepulveda Basin, Devonshire, and the 405 corridor. Our crews typically reach Mission Hills addresses within the day.
- North Hills West
- Devonshire corridor
- Sepulveda Basin side
- Mission Hills proper
- San Jose Street area
Service Area - Cities Near Mission Hills
Beyond Mission Hills, our crews also serve San Fernando, CA, Granada Hills, CA, Panorama City, CA, and Sylmar, CA. Dispatch is coordinated from our Los Angeles office, and a live person answers the phone 24 hours a day.
Serving Mission Hills, CA - Our Local Coverage Area
We’re based in the Mission Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Mission Hills
Most Mission Hills calls are reached the same day, often within a few hours. We dispatch from our Los Angeles office and keep crews in the Valley throughout the week. Call (747) 294-2900 and a live person confirms the schedule on the spot.
Simple repairs like hinge replacement, keypad work, and welding do not require a permit. Full post replacement or new gate installation may trigger a city check if the property line is involved. We flag any permit question before work starts.
The written price includes labor, parts, and any concrete or conduit work, and it is handed over before anything is done. You approve the scope first, and the final invoice matches the written number. Every job leaves with a photo record under Clause 4 of the Haven Standard.
Call (747) 294-2900 for a written fee estimate on any gate repair, access control, or welding job in Mission Hills. A live person answers, day or night, and the price is in writing before we begin.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Hills Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.