Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Tujunga, CA
Gate access control in Tujunga carries a fire-code layer that most Los Angeles gate companies never deal with. Because Tujunga sits inside a CAL FIRE Very High Fire Hazard Severity Zone, automated driveway gates here need emergency-access overrides, Knox key switches or breakaway mechanisms, that flatland Valley communities don’t require. Add in Santa Ana wind gusts that rack wooden frames off square and clay-and-decomposed-granite soil that heaves posts out of plumb, and a Tujunga gate job is rarely a simple parts swap. Call us at (747) 294-2900 and we’ll tell you what you’re actually dealing with.
Why Tujunga Homes Are Different
Tujunga’s housing stock runs to post-WWII ranch homes and older craftsman bungalows on larger foothill lots. Many of those perimeter gates were built decades ago, set in soil that expands and contracts with seasonal rains and seismic activity. We regularly find posts pulled two or three inches out of plumb, which throws off every measurement downstream: hinge alignment, latch position, limit-switch travel. The semi-rural character of the neighborhood means gated driveways are the norm here, not the exception, so the volume of aging gate hardware is high.
The Verdugo Mountain foothills and the mouth of Tujunga canyon act as a wind funnel during Santa Ana events. Gusts hit harder than on the valley floor, strong enough to shear hinge bolts and bend automated slide-gate tracks in a single afternoon. Coupled with intense UV and single-digit humidity during fire weather, powder-coated metal and wood joinery both degrade faster than they would in Van Nuys or Studio City.
Our Main Tujunga Services
Tujunga homeowners call on us most for three jobs: repairing gates that the wind or soil movement have knocked out of true, replacing gates whose fire-code compliance has lapsed, and rescuing opener motors that have been fighting a misaligned track for too long.
Gate Repair in Tujunga
Most repair calls in Tujunga start as a gate that suddenly won’t close or a hinge that let go during a wind event. We reset posts to plumb, replace sheared hardware, and square frames that the gusts have racked. The fire-code angle matters here: a gate that doesn’t fully close or latch is a non-compliant gate in a VHFSZ. See Gate Repair in Tujunga for full pricing and how we document every adjustment.
Gate Installation in Tujunga
New gate installations in Tujunga have to account for soil movement, wind load, and LA County fire-code emergency-access requirements from the first day. We size footings for the decomposed-granite soil and spec gates with Knox key switches or breakaway hardware where the fire department requires it. See Gate Installation in Tujunga for what a full install includes and what it costs.
Gate Motor & Opener in Tujunga
Tujunga opener failures usually trace back to a track or hinge problem that overloaded the motor, not the motor itself. We test the full travel path before replacing any operator, because putting a new motor on a heaving post just burns out the new motor. See Gate Motor & Opener in Tujunga for brand coverage and replacement ranges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Tujunga
Tujunga gates need access control that works through fire season. Keypads, remotes, phone entry and video intercoms all have to function when the power is out and the air is dry, because a gate that won’t open for an evacuation is a life-safety problem, not a convenience problem. We carry parts for Linear, Viking, Ghost Controls, and DoorKing systems, and every visit leaves a written record of what was found and what was set. Learn more on the Gate Access Control hub.
Keypad Entry
Signs you need it
The keypad works intermittently, has dead keys, or won’t accept codes in wet or hot weather.
What it costs in Tujunga
Keypad replacement in Tujunga typically runs $180 to $380 depending on brand and whether the mounting plate is intact.
How we do it
We meter the existing wiring, replace the keypad, program the new codes, and photograph the finished install.
Video Intercom
Signs you need it
The camera feed is dark or intermittent, audio crackles, or the call button doesn’t ring inside the house.
What it costs in Tujunga
Video intercom repair in Tujunga averages $220 to $480; full replacement with a new monitor runs $650 to $1,200.
How we do it
We isolate the power supply and signal path, replace the faulty component, and document the settings before we leave.
What Gate Access Control Costs in Tujunga
| Item | Typical range in Tujunga |
|---|---|
| Keypad replacement | $180 - $380 |
| Remote programming / replacement | $80 - $150 |
| Video intercom repair | $220 - $480 |
Does Tujunga fire code require a Knox key switch?
Yes, for automated gates in the VHFSZ, Tujunga falls under LA County fire code requiring emergency-access overrides. A Knox key switch or breakaway mechanism lets fire crews open the gate without waiting for the homeowner. Call (747) 294-2900 and we’ll check what your specific gate needs.
Can you program a gate opener to my existing remotes?
Yes. We can clone most existing remotes to your opener, including Linear, Viking, and DoorKing. Bringing your functioning remote speeds up the job. Call (747) 294-2900 for a written price before we start.
Gate Parts & Welding in Tujunga
Tujunga’s aging wood and wrought-iron gates fail at the joints and the hinge points before the panel itself gives out. Wind load from the canyon mouth works hinges loose, and the clay-and-decomposed-granite soil shifts posts seasonally. Most welding and parts calls here are about restoring what’s there, not replacing the whole gate. Learn more on the Gate Parts & Welding hub.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground, or the hinge pins have visible play when you push the gate side to side.
What it costs in Tujunga
Hinge replacement in Tujunga typically runs $120 to $260 per hinge, depending on whether the post is solid enough to accept new hardware.
How we do it
We brace the gate, cut and weld new hinge barrels, and realign the gate to within a quarter-inch of plumb before photographing the fix.
Post Replacement
Signs you need it
The post leans visibly, the gate no longer latches, or the base of the post shows stress cracks or rust flaking.
What it costs in Tujunga
Post replacement in Tujunga averages $350 to $700 per post, including cutting, setting, and concrete work.
How we do it
We excavate the old footing, set a new post in concrete sized for the soil, and weld the gate hardware to the new post once it has set.
What Gate Parts & Welding Costs in Tujunga
| Item | Typical range in Tujunga |
|---|---|
| Hinge replacement (per hinge) | $120 - $260 |
| Post replacement (per post) | $350 - $700 |
| Custom welding repair | $180 - $420 |
Can you weld a wrought-iron gate back together in place?
Yes. Most mobile welding repairs on Tujunga gates are done in place. We grind the crack, weld it, and match the finish as closely as the existing powder coat allows. Call (747) 294-2900 for a written estimate.
Do you replace rollers on slide gates?
Yes. Slide-gate rollers in Tujunga take abuse from Santa Ana grit and dry soil. We replace worn rollers and resquare the track if it has bent. Call (747) 294-2900 and we’ll price the whole job in writing.
Brands We Service in Tujunga
We service Linear, Viking, Ghost Controls, and DoorKing operators among the nine major automation brands we carry parts for. Most common Tujunga parts are stocked on the truck; uncommon parts ship within two to three business days. Read more on our brands page.
Pricing for Gate Repair in Tujunga, CA
| Service | Typical range in Tujunga |
|---|---|
| Keypad replacement | $180 - $380 |
| Remote programming / replacement | $80 - $150 |
| Video intercom repair | $220 - $480 |
| Hinge replacement (per hinge) | $120 - $260 |
| Post replacement (per post) | $350 - $700 |
| Custom welding repair | $180 - $420 |
| Gate roller replacement | $140 - $320 |
| Full gate replacement | $1,800 - $5,500 |
Price in Tujunga gets pushed up by soil conditions that require larger concrete footings and by fire-code retrofits like Knox key switches. The price we write down before we start is the price you pay. No surprises, no change orders without a conversation and a new written agreement first.
Neighborhoods We Serve in Tujunga
We dispatch to every part of Tujunga, from the Sun Valley Road corridor up through Apperson Street and the canyon-adjacent streets. Because Tujunga is our home turf, response is typically same-day for most repair calls, and our live line answers 24/7.
- Sun Valley Road corridor
- Apperson Street area
- Tujunga Canyon foothills
- Foothill Boulevard east of the wash
- Plainview Avenue and the older bungalow blocks
Service Area - Cities Near Tujunga
We also serve the surrounding foothill and valley communities where the same wind and soil conditions apply. If you’re in Sun Valley, CA, San Fernando, CA, Sylmar, CA, or Panorama City, CA, the same written-price and documented-record standard applies.
Serving Tujunga, CA - Our Local Coverage Area
We’re based in the Tujunga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tujunga
We dispatch same-day for most Tujunga repair calls. A live person answers at (747) 294-2900 around the clock, and the technician’s name and photo are sent before arrival. Emergency access problems involving fire-code compliance are prioritized.
Most gate repairs and replacements in Tujunga don’t require a building permit, but automated gates in the VHFSZ must meet LA County fire-code requirements for emergency access. We handle the compliance side and can advise if your specific project crosses a permitting threshold.
The Haven Standard is our written-price, documented-evidence standard. Clause 1 means you get a written price before any work starts. Clause 4 means a photographic record of what was found, what was set, and what was installed. The 365-Day Done Right Promise covers all completed work.
For a free estimate on any Tujunga gate repair, access control upgrade, or parts and welding job, call (747) 294-2900. A live person answers, and the written price comes before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tujunga Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.