Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Granada Hills, CA
Gate Access Control in Granada Hills comes down to two jobs most often: replacing mid-1990s keypads and card readers on gates installed after the 1994 Northridge earthquake, and adding phone or video entry to older ranch-property gates north of Rinaldi Street. The heat and Santa Ana winds here shorten the life of exposed keypad membranes and card reader housings faster than in most of the Valley. Call (747) 294-2900 and we’ll give you a written price before any work begins.
Why Granada Hills Homes Are Different
Granada Hills sits against the Santa Susana foothills, and that position shapes the gate work we do. The equestrian zone north of Rinaldi has extra-wide ranch gates, often 14 feet or wider, hung on pintle hinges set in concrete footings that shifted in the ’94 quake and were never releveled. We re-plumb those posts rather than bolting new hinges to a leaning foundation. The 1950s through 1970s tract homes south of Rinaldi have a different issue: block-wall side yards with original steel pedestrian gates now 50 to 70 years old, many of them racked by decades of wind gusts funneled through the Santa Susana Pass. Summer heat over 100°F makes steel frames expand and bind against posts, which is why July and August are our busiest months for gate binding calls in Granada Hills.
Our Main Granada Hills Services
Most Granada Hills homeowners call us for one of three things: a gate that stopped working, a gate that was never right and needs replacing, or a motor that runs but won’t move the gate. Each has its own page with pricing and local details.
Gate Repair in Granada Hills
Repair work in Granada Hills usually means a welded crack in a steel frame, a post that shifted out of plumb, or a hinge that seized with age. We bring a welder to the site when the frame is involved, not just a parts bin. Wind damage from Santa Ana events racks wooden gates off their posts here more than in most of Los Angeles, and we rebuild the post seat before rehanging the leaf. See Gate Repair in Granada Hills for the full detail and price ranges.
Gate Installation in Granada Hills
New gates in the horse-property zone north of Rinaldi need to be spec’d for weight and wind load, not just width. We see ranch gates that were built light and failed within three years, so we size the post footings and hinge hardware for the actual leaf weight. On the tract-home side, an installation often means replacing a 1970s steel gate with a welded aluminum frame that won’t rust. The full scope is on Gate Installation in Granada Hills.
Gate Motor & Opener in Granada Hills
Granada Hills wind gusts burn out automatic gate motors that run constantly against resistance, and the heat kills control boards in boxes that lack ventilation. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule on site, and we photograph the limit-switch settings before and after every adjustment. See Gate Motor & Opener in Granada Hills for brand-specific notes and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Granada Hills
Gate Access Control in Granada Hills means servicing the entry systems on hundreds of gates that were installed or rebuilt after the 1994 Northridge earthquake. Those DoorKing and Elite keypads and card readers are now 28 to 30 years old, and the exposed membranes crack from heat while the internal boards corrode from wind-driven dust. The job here is to either rebuild what’s already on the gate or add phone and video entry to gates that never had it. We handle every part of that work through our Gate Access Control service, and the price is written before we touch anything.
Keypad Entry
Signs you need it
Codes stop opening the gate, buttons fail intermittently, or the housing shows cracks from sun exposure.
What it costs in Granada Hills
Keypad replacement runs $185-$400, and a new cellular-capable keypad is $450-$900 installed.
How we do it
We identify the existing wiring pair, mount the new keypad, program the access codes, and photograph the finished installation.
Phone Entry
Signs you need it
Visitors have no way to ring you, or the gate’s answering unit only works when someone is home.
What it costs in Granada Hills
A phone entry system costs $800-$1,800 installed, including the new control board and programming.
How we do it
We install the cellular unit, route calls to your phone number, program the open command, and hand you a written record of the configuration.
Video Intercom
Signs you need it
You’re buzzing people in without seeing who is standing at the gate, or the old intercom audio has died.
What it costs in Granada Hills
Video intercom installation runs $1,800-$3,500, depending on the camera type and whether we run new wiring.
How we do it
We mount the camera at gate height, run the power and data wiring, pair the indoor monitor, and test the call flow end to end.
What Gate Access Control Costs in Granada Hills
| Item | Typical range in Granada Hills |
|---|---|
| Keypad replacement | $185-$400 |
| Phone entry system | $800-$1,800 |
| Video intercom | $1,800-$3,500 |
Do I need to replace my whole entry system, or can you repair what’s there?
We repair the existing keypad, card reader, or intercom whenever the board and housing are still sound. Replacement only comes up when the unit is corroded beyond reliable operation, and we show you the opened unit before quoting replacement.
Will the wiring from my 1990s gate work with a modern keypad?
Usually yes. The original low-voltage wiring on most Granada Hills gates is still intact and we reuse it wherever possible. We confirm the wire condition before quoting, so there’s no surprise wiring charge after we begin.
Gate Parts & Welding in Granada Hills
Gate Parts & Welding in Granada Hills often comes down to the same failure pattern: a steel frame that cracked at a weld under wind load, or a post that shifted after the 1994 earthquake and was never releveled. The Santa Ana gusts that funnel through the pass stress the weld points on double-swing ranch gates north of Rinaldi more than almost any other force. We weld on site and replace the hardware, and every job leaves with a photo record under our Gate Parts & Welding service.
Hinge Replacement
Signs you need it
The gate drops at the latch side, scrapes the ground, or sags visibly when it’s open.
What it costs in Granada Hills
Hinge replacement runs $150-$600 on standard gates and $600-$2,500 on heavy ranch gates.
How we do it
We support the leaf, cut or unbolt the old hinge, set the new one to plumb, and photograph the finished weld or bolt pattern.
Post Replacement
Signs you need it
The post leans, the concrete at the base is cracked, or the gate binds because the post moved.
What it costs in Granada Hills
Post replacement runs $500-$1,500 per post, and $2,500-$8,000+ for wide ranch gates with heavy footings.
How we do it
We cut the old post at the footing, dig and pour a new concrete base, set the post plumb, and rehang the gate after the concrete cures.
What Gate Parts & Welding Costs in Granada Hills
| Item | Typical range in Granada Hills |
|---|---|
| Hinge replacement | $150-$600 standard, $600-$2,500 ranch |
| Post replacement | $500-$1,500 per post |
| Custom welding | $250-$1,500 |
Can you weld the gate in place, or does it need to come off the hinges?
We weld most cracks with the gate still hung, which is faster and keeps the alignment true. If the crack is at the hinge plate, we’ll support the leaf and weld it in position, then photograph the repair before we leave.
Do you replace just the hinge, or do you recommend doing the post too?
We quote the hinge alone when the post is still plumb. If the post has moved, the honest fix is to reset the post first, then hang a new hinge on a level foundation. We’ll show you the level reading either way.
Brands We Service in Granada Hills
We work on DoorKing, Elite, LiftMaster, Mighty Mule, and the other major motor brands on gates across Granada Hills. Common parts like keypads, photo-eyes, and hinge sets are stocked in our vans, so we don’t have to order and come back. See our brands for the full list.
Pricing for Gate Repair in Granada Hills, CA
| Service | Typical range in Granada Hills |
|---|---|
| Keypad replacement | $185-$400 |
| Phone entry system | $800-$1,800 |
| Video intercom | $1,800-$3,500 |
| Hinge replacement | $150-$600 standard, $600-$2,500 ranch |
| Post replacement | $500-$1,500 per post |
| Custom welding | $250-$1,500 |
| Remote control replacement | $50-$150 per remote |
| Card reader replacement | $300-$800 |
In Granada Hills, prices push higher on the ranch gates north of Rinaldi because the leaf weight and post footings are far beyond a standard residential gate, and releveling a post from the ’94 quake is real work. Whatever the number, we hand you the written price before we start, and it doesn’t change unless you add scope you asked for.
Neighborhoods We Serve in Granada Hills
We run jobs throughout Granada Hills, from the tract streets south of Rinaldi to the horse properties up against the Santa Susana foothills. Our crews are local to the Valley and typically reach a Granada Hills gate the same day for emergency calls.
- Granada Hills North (north of Rinaldi, horse property zone)
- Knollwood
- Balboa Highlands
- Granada Hills South
- O’Melveny Park area
Service Area - Cities Near Granada Hills
We also serve the surrounding Valley cities where the same Santa Ana wind and aging-housing patterns apply. Gates in Mission Hills, CA, San Fernando, CA, Northridge, CA, and Sylmar, CA see the same 1990s-era hardware and wind-driven failures we fix every week in Granada Hills.
Serving Granada Hills, CA - Our Local Coverage Area
We’re based in the Granada Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Granada Hills
For a gate stuck open or a motor that won’t respond, we typically dispatch a local crew the same day. Dispatch and scheduling are coordinated from our Los Angeles office, and the technician’s name and photo are sent before arrival.
Most repairs don’t require a permit. A full replacement with new footings and an automated opener can require a permit through the City of Los Angeles, and we’ll tell you during the estimate whether your job falls into that category.
Yes. That’s the foundation of how we operate under The Haven Standard. You get a written scope and a flat price before the first tool comes out, and the price doesn’t change unless you add work you asked for. Call (747) 294-2900 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Granada Hills Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.